115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).
Move slurry and dirty liquids without the worry of damaging the pump.
Operates on continuous duty in temperatures of up to 104°, and intermittent duty up to 140°. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.
Move slurry and dirty liquids without the worry of damaging the pump.
The pump won’t rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.
Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.
If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.
Side discharge submersible pumps offer higher discharge and solids handling capabilities of up to 2 inches.
No need to worry about the water level for the pump!
Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.
Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.
Pump Type | Submersible Trash pump |
Starting Type | Automatic |
Casing | Stainless Steel |
Motor (HP) | 1/2 |
Voltage | 115 |
Starting amps | 34 |
Running amps | 8.3 |
Duty | Continuous |
Motor insulation | Class F |
Overhead protection | Built-In Thermal Automatic Reset |
Discharge Type | Side |
Discharge capacity | 110 gpm |
Max. head (feet) | 32 |
Port diameter ( inches) | 2.0 FNPT |
Maximum pressure | 14 psi |
Solids handling | 2.0" |
Impeller | Single Channel Stainless Steel |
Seals | Tandem Mechanical Carbon/Ceramic-upper SIC/SIC-lower |
Cord length (feet) | 25 |
Cord type | Heavy-Duty 115V |
Dimensions (WxH) | 9.0" x 21.5" |
Pump diameter | 9.0" |
Dry weight | 36 lbs. |
Residential Warranty | 1 year |
Commercial Warranty | 1 year |